EXTREME CAUTION SHOULD BE EXERCISED WHEN WALKING ON ROOF PANELS. OILS USED DURING THE ROLL FORMING PROCESS AND/OR NATURAL MOISTURE MAY CAUSE THE PANELS TO BECOME SLIPPERY. DO NOT STEP ON PANELS WITH CREASED EDGES. DO NOT STEP ON OR NEAR THE EDGE OF A PANEL. DO NOT STEP WITHIN 5 FEET OF THE END OF A PANEL. DO NOT USE LOOSE PANELS AS WORK PLATFORMS. DO NOT WALK ON UNSECURED PANELS. DO NOT WALK ON TRANSLUCENT PANELS. SECURE ALL LOOSE PANELS AT THE END OF THE WORK DAY. USE EXTRA CARE WHEN WORKING ON STEEP SLOPES. WHEN INSTALLING CLIPS, WALK ONLY OVER THE PURLIN / JOIST LINES. AT THE END OF EACH WORKDAY, ALL FULL PANEL RUNS SHOULD BE HAND CRIMPED INTO A ROLL LOCK SEAM AT THE LOW EAVE, END LAP, HIGH EAVE, AND EVERY CLIP LOCATION.
IN COMPLIANCE WITH THE HAZARD COMMUNICATION RULE 1910:1200, MATERIAL SAFETY DATA SHEETS HAVE BEEN PROVIDED FOR YOUR USE AND SAFETY. THESE DATA SHEETS SHOULD BE MADE AVAILABLE TO ALL PERSONNEL THAT COME IN CONTACT WITH THESE PRODUCTS. THESE DATA SHEETS WILL GIVE YOU THE NECESSARY INFORMATION TO PROPERLY HANDLE SUCH MATERIALS AND WHAT TO DO IN CASE OF AN EMERGENCY.
đang được dịch, vui lòng đợi..