SAFETY INSTRUCTION Please obey the following instructions1. Before machine turns on, please press alarm to notice persons nearby, and check if somebody is dealing with the machine condition, make sure persons leave machine away before machine turns on.2. Don’t do any dangerous movement while running machine, such as: clean up the the unnecessary articles on printing plate and machine, apply oil on gears. The above movements are not allowed the operators do while running machine, it must do it after stop running machine.3. The operators are not allowed play pranks and take regardless.4. Putting unnecessary articles or tools on machine is not allowed.5. Operators should operate refer to standard process and do the maintenance correctly. It will enlarge the lifetime and make sure the safety of operators.Daily maintenance.:1. Oil feeder: Pull once to fill with oil in the morning, at midday and at night. 3/16” and ¼” oil cup is filled with oil every morning, and keep the machine clean.2. Check if the lubrication oil on each gear is sufficient or not.3. Oil cup and oil mirror is filled with oil every morning, and keep the machine clean.4. Daily duty- off:4.1 Clean up oil ink and glue every day ( include: ink roller, ink trough, printing windlass, rubber roller, printing plate and glue trough).4.2 Clean up oil and glue pump at present day and clean up the surroundings of the machine and also clean away the unnecessary articles over the machine.4.3 cho máy bơm keo và mực in bơm, sử dụng nước sạch để làm sạch keo hoặc mực nước cơ sở bị cấm tại các máy bơm. Nếu nó là cơ sở dầu mực, xin vui lòng sử dụng các dung môi để clearn lên.Lượt bảo trì:1. kiểm tra nếu nó cần để lấp đầy với dầu bôi trơn dầu trên mỗi bánh hay không.2. kiểm tra xem nếu dầu động cơ hộp số giảm hay không. Nếu nó đã được giảm, xin vui lòng le dầu gương lấp đầy với dầu động cơ (hộp số của đơn vị cắt * 1 set & hộp in * 3 bộ).3. kiểm tra nếu các vít ở mỗi phần lỏng hay không, và sau đó khóa chúng chặt chẽ.4. xin vui lòng chec hàng tuần nếu chuỗi và chuyển tải hoặc đàn hồi là bình thường hay không.Monthy bảo trì:1. kiểm tra nếu mỗi bánh hoặc các bộ phận khác có thiệt hại hay không, nó sẽ gây ra việc giải phóng mặt bằng trở nên lớn hơn và ảnh hưởng đến chất lượng của các túi. Nếu sự giải phóng mặt bằng là quá lớn, xin vui lòng trao đổi nó.2. sử dụng dầu mỡ súng để lấp đầy với dầu trên tất cả bearnings.
đang được dịch, vui lòng đợi..
![](//viimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)