Chúng tôi T8 độ sáng cao LED ống áp dụng Epistar chip với 10 * 26mil wafer có thể đạt được ít nhất 20 ~ 30% thêm lumen sản lượng hơn bình thường T8 LED ống tìm thấy trên thị trường. Ví dụ, chúng tôi 18W 1200mm cao độ sáng T8 LED ống có thể đạt 2050lm. Với đầu dòng đèn LED 3528SMD, nó có thể đảm bảo một sự thay thế lý tưởng và tiết kiệm hơn 70% năng lượng khi so sánh với huỳnh quang T8 ống. Công nghệ kiểm soát độc đáo nhiệt-tản nhiệt và độ bền cao nhôm nhà ở cho phép chúng tôi LED ánh sáng ống để cuối cùng trên 35, 000hours.Độ tin cậy cao► Họ đang sử dụng cao độ dẫn nhiệt nhôm nhà ở kết nối chặt chẽ với tấm nhôm PCB, mà có thể đảm bảo nhiệt có thể tiêu tan ra nhanh chóng. Không có sự tích tụ nhiệt bên trong;► The G13 kết nối có thể là 90 độ thể mỗi yêu cầu. Nó được làm bằng hợp kim nhôm cộng với khả năng kháng cháy PC. Các bi-chân được làm bằng đồng với niken mạ;► Chúng được làm bằng 3528SMD siêu sáng đèn LED (9 ~ 10lm / 0.06W 3528SMD), với phân rã ánh sáng thấp và tản nhiệt tốt;► Họ sử dụng cô lập liên tục điều khiển hiện thời với PF > 0,95. Nó có thể bảo vệ T8 ống từ short-circuit, sét, hơn hiện tại, over-điện áp, nhiệt độ cao. Không có ánh sáng stroboscopic. Không có ô nhiễm để lưới điện. Trình điều khiển được trang bị với cao nhiệt độ chịu, bị cô lập và khả năng kháng cháy PC ống, mà có thể đảm bảo an toàn cao;► Họ áp dụng đặc biệt được thiết kế loop mạch, một LED thất bại sẽ không ảnh hưởng đến thất bại toàn bộ ống T8.► Scientific packaging with paper cylinder for single tube. It is more elegant in appearance, much firmer and could protect tubes from any damage during long-distance transportation.High Efficacy► They are using high quality SMD LEDs (with high quality TaiWan Epistar wafer 10*26 mil), with high lumen efficacy (typical 115LM/W)Plug and Play► Our LED T8 tubes can be placed into any existing T8 socket directly. Just remove the starter and disconnect the ballast in the fixture.
đang được dịch, vui lòng đợi..