How many bottles are installed in t

How many bottles are installed in the strut of each engine ?
Two
Three
Four
When a fire warning is triggered, the pilot must first?
Operate the fire push button
Shut down the engine
Read message on ECAM
Each bottle has 2 discharge heads :
1 for outer engine, here engine 1
1 for outer engine, here engine 2
Both A,B
A cargo compartment which will contain a fire itself and ventilate is a class:
A
D
C
CO2 fire extinguishing are used for?
All fires in fuselage
Engine only
Baggage holds only
The portable halon fire extinguisher bottle stores gas with a pressure of about:
50 psi
100 psi
150 psi
Fire extinguishing systems are always installed:
In areas where fuel is burned
In the cargo compartment
On the cockpit
Handling of the dangerous discharge cartridge is only permitted if:
No condition
You have a license to work with class C explosives
The date on the cartridge shows that it is 10 years
The fire extinguishing agent pressure is monitored by:
A red light in the cockpit
A red disc on the pylon
A pressure switch
Which of the following statements is correct about the light on fire control panel in the cockpit:
It is controlled by pressure switch when the bottle pressure decreases below 50% of the normal pressures.
It is controlled by pressure switch when the bottle pressure decreases above 50% of the normal pressures.
It is controlled by pressure switch when the bottle pressure increases below 50% of the normal pressures.
What avionic smoke detector installed?
On the air extraction duct of the avionic ventilation system
On the air inlet duct of the avionics ventilation system
In the avionics compartment wiling
The lavatory fire protection is provided by:
The lavatory smoke detection system
The lavatory automatic extinguishing
The lavatory smoke detection system and the waste bin automatic extinguishing.
Where is lavatory smoke detector located?
In the waste bin
In the ceiling panel, beside the air extraction duct
In the air extraction duct.
The fire protection system is provided by
Fire extinguish system
Fire detection system
Fire extinguish system and fire detection system
All of the fire and overheat detection system include the following parts:
Sensor, a control unit
Sensor, panels for the warnings
Sensor, a control unit panels for the warnings

Where is the overheat sensor located in?
Monitor area
Avionic compartment
In the cockpit
How many the loop type is used?
Two
Three
Four
When did the engine fire detection system operated?
The engine is running
The engine is shutdown
The engine is running or shutdown
What happen when APU fire occurs on ground?
The APU is automatically shutdown
The APU is manually shutdown
The APU is isolated
You can find the sensor of the engine fire detection system:
The semiconductor
The pneumatic
a and b
A fire warning is only triggered if:
1 of 2 sensors detect fire
2 sensors detect fire at the same time
None of above
A principle operates of the pneumatic pressure loop:
The pressure of the gas increases at higher temperatures
Electrical resistance with increasing temperature
None of above
A principle operates of the semiconductor loop:
The pressure of the gas increases at higher temperatures
Electrical resistance with increasing temperature
None of above

“A wheel well fire or overheat detection system alerts the flight crew when a wheel with an overheated brake is retracted into the wheel well, because a tire can explode”. Where is the detection system installed?
Only the main wheel wells
Only the nose wheels
The main wheel wells and the nose wheels

Kết quả (Việt) 1:

Bao nhiêu chai được cài đặt trong chống mỗi động cơ?HaiBaBốnKhi một cảnh báo lửa được kích hoạt, Phi công phải lần đầu tiên?Hoạt động nút điều khiển hỏa lựcTắt động cơĐọc tin nhắn trên ECAMMỗi chai có 2 xả đầu:1 cho động cơ bên ngoài, động cơ ở đây 1 1 cho động cơ bên ngoài, động cơ ở đây 2Cả hai A, BMột khoang hàng hóa đó sẽ chứa một ngọn lửa chính nó và thông gió là một lớp học:ADCCO2 cháy chữa cháy được sử dụng cho? Tất cả các đám cháy ở thân máy bayĐộng cơ chỉGiữ Giữ hành chỉChai cháy halon di động mua sắm khí với áp suất về:50 psi100 psi150 psiHệ thống dập lửa luôn luôn được cài đặt:Tại các khu vực nơi nhiên liệu được đốt cháyTrong khoang hàng hóaTrên buồng láiXử lý của mực nguy hiểm xả chỉ được phép nếu:Không có điều kiệnBạn có một giấy phép để làm việc với vật liệu nổ lớp CNgày đầu cho thấy rằng nó là 10 tuổiĐại lý áp lực chữa cháy được giám sát bởi:Một ánh sáng màu đỏ trong buồng láiMột đĩa màu đỏ trên giá treo dưới cánhMột chuyển đổi áp suấtMà trong số các câu sau đây là chính xác về ánh sáng trên bảng điều khiển hỏa lực trong buồng lái:Nó được điều khiển bởi áp lực chuyển đổi khi áp lực chai giảm dưới 50% của những áp lực bình thường.Nó được điều khiển bởi áp lực chuyển đổi khi áp lực chai giảm trên 50% của những áp lực bình thường.Nó được điều khiển bởi áp lực chuyển đổi khi áp lực chai tăng dưới 50% của những áp lực bình thường. What avionic smoke detector installed?On the air extraction duct of the avionic ventilation system On the air inlet duct of the avionics ventilation systemIn the avionics compartment wilingThe lavatory fire protection is provided by:The lavatory smoke detection systemThe lavatory automatic extinguishingThe lavatory smoke detection system and the waste bin automatic extinguishing.Where is lavatory smoke detector located?In the waste binIn the ceiling panel, beside the air extraction ductIn the air extraction duct.The fire protection system is provided by Fire extinguish system Fire detection system Fire extinguish system and fire detection systemAll of the fire and overheat detection system include the following parts:Sensor, a control unitSensor, panels for the warningsSensor, a control unit panels for the warningsWhere is the overheat sensor located in?Monitor areaAvionic compartmentIn the cockpit How many the loop type is used?TwoThreeFourWhen did the engine fire detection system operated?The engine is runningThe engine is shutdownThe engine is running or shutdownWhat happen when APU fire occurs on ground?The APU is automatically shutdownThe APU is manually shutdownThe APU is isolated You can find the sensor of the engine fire detection system:The semiconductorThe pneumatica and bA fire warning is only triggered if:1 of 2 sensors detect fire2 sensors detect fire at the same timeNone of aboveA principle operates of the pneumatic pressure loop:The pressure of the gas increases at higher temperaturesElectrical resistance with increasing temperatureNone of aboveA principle operates of the semiconductor loop:The pressure of the gas increases at higher temperaturesElectrical resistance with increasing temperatureNone of above “A wheel well fire or overheat detection system alerts the flight crew when a wheel with an overheated brake is retracted into the wheel well, because a tire can explode”. Where is the detection system installed?Only the main wheel wellsOnly the nose wheelsThe main wheel wells and the nose wheels