IntroductionSWIM realizes a very bo

Introduction

SWIM realizes a very bold statement has been made. SWIM however feels confident that the claim can be substantiated.

SWIM has read each thread in this forum related to smoking methodology and technique, and has used each and every one of them before.

SWIM now wants to share with this community a smoking method which hasn't been mentioned, and why SWIM believes this is the optimal method.

Of course, if after reading and trying SWIM's method, you disagree, SWIM welcomes any constructive criticisms which can only serve to increase this community's knowledge base.

SWIM has done a "Basics" and "Advanced" Section. It is recommended to be familiar with the basic methodology before attempting the advanced. Reading ahead to get a better understanding of the concept is encourage though.
__________________________________________________ ______________

The Disadvantages of the Other Smoking Methods

1.The Light Bulb Method

Disadvantage(s)
This method is without a doubt the most wasteful and inefficient way to smoke. If any of you have been following the forums, you should not be using this method at all.

2. Aluminium Foil Chaser Method

Disadvantage(s)
Too much of a hassle especially if you want to get high quickly
Properly sized and folded aluminum foil strips have to be prepared
A needle thin foil cylinder needs to be made to fit into the lighter flame's opening so as to generate a super tiny flame and not overheat the lighter from prolonged burning. If flame is too big, the foil strip will burn along with the meth on it.
New users need to learn how to chase the meth along the foil strip while simultaneously making sure the flame moves in sync and without going too near the foil resulting in a burnt mess
3. Glass Pipe with Bong Method

Disadvantage(s)
Not everyone has easy access to a pre-made glass pipe and glass bong
Using a glass pipe with a makeshift bong is not efficient for rotating the glass bowl as the user either has to rotate the entire bong which is awkward, or try to rotate the glass pipe, which will most likely result in air leakage at the point where the glass tube is connected to the makeshift bong.
Any method with a glass bowl isn't efficient as there is ultimately limited space where the melted meth can flow and this limits the burn duration options a user has.
4. Glass Pipe Direction Inhalation Method

Disadvantage(s)
Similar reason to last reason of above-mentioned method
Inhaling directly is rougher on the lungs and limits/prevents users from taking larger and longer hits
Unless it is common for you to get highly pure methamphetamine, there is no filtering of additional adulterants that may be present as compared to using a water bong.

__________________________________________________ ______________


The Optimal Method

This method requires:
A Water Bong (Makeshift or Glass is fine) including glass stem (no bowl tip)
Standard 6 inch Test Tube
Jet Butane Lighter (BIC-type lighters may be used but jet is preferable)
Basic Methodology:
Place the portion of methamphetamine intended for smoking inside the test tube
You should aim for the methamphetamine to be placed somewhere around the middle of the test tube
If the amount you have placed is large, try to spread the methamphetamine out such that there isn't a thick mound. An even surface area allows for even heating and therefore melting.
Holding the closed end of the test tube with one hand, lift it up horizontally.
Equip your free hand with your lighter, and proceed to heat the methamphetamine in the test tube.
As the methamphetamine melts, turn the test tube right and left, so that the liquid spreads across an even surface area.
Once reasonably spread out, allow the methamphetamine to cool and re-crystallize.
To commence smoking, equip your methamphetamine bong.
Holding the closed-end of the test tube, bring the front opening of the test tube towards the glass stem (without a bowl) of the bong.
Position the glass stem of the bong inside the test tube near the re-crystallized methamphetamine. Try to stay about 3-5cm away from the methamphetamine.
The meth bong is meant to be stationary preferably on a stable platform.
One hand should be holding the end tip of the test tube that the glass stem is now in.
The other hand controls the lighter.
To begin smoking, start lighting the re-crystallized methamphetamine in the middle of the test tube.
As it melts, rotate the test tube slowly in either the right or left direction. Rotate only one way and not both ways. So, rotate in a circular motion.
As you rotate the methamphetamine in the test tube, start inhaling through the bong.
After satisfied with your drag, stop heating the test tube and allow the methamphetamine to cool.
Repeat process when ready to smoke again.
Some Important Pointers:
The most important element lies in the rotation of the methamphetamine while heating it in liquid form.
If you are using a jet lighter, the strength of the flame doesn't even matter as long as you rotate correctly.
Using a normal BIC-type lighter will require a slightly higher learning curve as the flame shouldn't touch the glass and heating isn't as even or efficient.
Try not to let the methamphetamine flow too far at either the end or front of the test tube.
If it goes to far towards the end where your fingers are, heating it might prove troublesome as it might be too hot for you to hold.
The front opening of the test tube is best supported by the glass stem of the bong for balanced control during rotation. Therefore, you do not want the methamphetamine to flow too much towards the front either
When rotating, try to keep the test tube at an even level.
Should you find the methamphetamine reaching too far backwards or forwards, during rotation, you may angle the test tube upwards or downwards, depending on the direction you want it to flow.
Always heat the tip of the re-crystallized methamphetamine in the direction you want it to flow when melted. Rotate in the opposite direction. For example, if you want the methamphetamine to flow leftwards in the test tube, heat the left part of the re-crystallized methamphetamine and rotate the test tube clockwise.

Why this Method is Optimal?

It is flexible and caters to whichever amount a user requires or is accustomed to smoking.
Any flame and any type of lighter can be used. There is no need to worry about having too big a flame and risk burning the methamphetamine.
Users are able to do longer continuous burns without risking burnt methamphetamine
The test tube has a closed end, which prevents any methamphetamine smoke from escaping should a user feel out of breath and stops inhaling too early.
Can be easily set up with every day items found in local stores instead of trying to forage for illegal meth pipes or meth bongs.
The next 2 points become relevant after reading the next section below:
Practicing and perfecting this method will result in being able to perform optimal drags, making optimal use of the product
Unlocks special techniques which can only be performed using this method.
__________________________________________________ ______________

The Art of Smoking

Performing an optimal drag is dependent on several key factors.

The amount of methamphetamine used isn't really a critical factor, as there is no optimal amount of methamphetamine to be used, only the optimal method to smoke whatever amount is used, as the principles remain the same regardless the amount.

The 3 core factors are:
The rate at which the methamphetamine cools
The efficiency of air flow
The length and strength of inhalation
Understanding how these 3 factors are interdependent with each other is the key to mastering the art of smoking.

Methamphetamine in crystal form is in the solid state of matter. Exposed to heat, it melts and changes to the liquid state of matter. When heated to its melting point, it becomes the gaseous state of matter.

The methamphetamine vapors are really invisible, much like water vapor when water has been heated past to its boiling point. Similar to the steam that is produced when water vapor is cooled by the surround air, the methamphetamine vapors cools from the air flow produced when you inhale, creating the white smoke we are all familiar with.

The length and strength of inhalation is inversely correlated though. The stronger the inhalation, the shorter the duration and vice versa. Therefore, finding the optimal balance between inhalation length and strength is critical as inhalation affects the efficiency of air flow which in turn affects the rate at which the methamphetamine cools, which of course affects the amount of methamphetamine smoke produced.

Once this core inter-relationship is properly understood, read on for advanced pointers and techniques.

Advanced Pointers

Optimal Inhalation
The key to longer drags lies in using just the right strength to inhale. Too much strength results in you filling your lung with air, reducing its capacity to take more methamphetamine smoke. Too little strength and you fail to generate sufficient air flow for a decent drag.
The strength of inhalation can be optimized by reducing the distance between the glass stem, and the methamphetamine in the test tube. The further the glass stem is from the methamphetamine, the stronger the breath required to inhale.
While easy to position close to the methamphetamine in solid form, the tricky part is holding the position constant during liquid form coupled with rotation of the test tube.
One should be familiar with the amount of methamphetamine used, good rotation technique and how the liquid flows in the test tube before attempting this.
Optimal Airflow

During inhalation, the glass stem should be angled in either the right or left direction rather than straight when placed in the test tube.
Therefore, either angle to tip of the glass stem to the right against right wall of the test tube, or left towards the left wall of the test tube.
An opposing force should b

Kết quả (Việt) 1:

Giới thiệuBƠI nhận ra một tuyên bố rất đậm đã được thực hiện. BƠI Tuy nhiên cảm thấy tự tin rằng yêu cầu bồi thường có thể được chứng minh.BƠI đã đọc mỗi chủ đề trong diễn đàn này liên quan đến thuốc phương pháp và kỹ thuật, và đã sử dụng mỗi một trong số họ trước khi.Bơi LỘI bây giờ muốn chia sẻ với cộng đồng này một phương pháp thuốc mà đã không được đề cập, và tại sao bơi tin rằng đây là phương pháp tối ưu.Tất nhiên, nếu sau khi đọc và cố gắng bơi của phương pháp, bạn không đồng ý, bơi chào đón bất kỳ phê bình xây dựng mà chỉ có thể phục vụ để tăng cơ sở kiến thức này của cộng đồng.BƠI đã thực hiện một "khái niệm cơ bản" và "Nâng cao" phần. Đó khuyến cáo là quen thuộc với các phương pháp cơ bản trước khi thử nâng cao. Đọc trước để có được một sự hiểu biết tốt hơn về khái niệm là khuyến khích mặc dù.__________________________________________________ ______________Những khó khăn của các phương pháp thuốc khác1. phương pháp ánh sáng bóng đènDisadvantage(s) Phương pháp này là không có nghi ngờ một cách lãng phí và không hiệu quả nhất để hút thuốc lá. Nếu bất kỳ của bạn đã sau các diễn đàn, bạn nên không sử dụng phương pháp này ở tất cả.2. nhôm lá mỏng Chaser phương phápDisadvantage(s)Quá nhiều rắc rối đặc biệt là nếu bạn muốn nhận được cao nhanh chóngĐúng kích thước và gấp nhôm lá mỏng dải phải được chuẩn bịMột cây kim lá mỏng xi lanh phải được thực hiện để phù hợp với ngọn lửa nhẹ hơn mở để tạo ra một ngọn lửa siêu nhỏ và không quá nóng nhẹ hơn từ đốt cháy kéo dài. Nếu ngọn lửa là quá lớn, dải giấy bạc sẽ đốt cháy cùng với meth trên nó.New users need to learn how to chase the meth along the foil strip while simultaneously making sure the flame moves in sync and without going too near the foil resulting in a burnt mess3. Glass Pipe with Bong MethodDisadvantage(s)Not everyone has easy access to a pre-made glass pipe and glass bongUsing a glass pipe with a makeshift bong is not efficient for rotating the glass bowl as the user either has to rotate the entire bong which is awkward, or try to rotate the glass pipe, which will most likely result in air leakage at the point where the glass tube is connected to the makeshift bong.Any method with a glass bowl isn't efficient as there is ultimately limited space where the melted meth can flow and this limits the burn duration options a user has.4. Glass Pipe Direction Inhalation MethodDisadvantage(s)Similar reason to last reason of above-mentioned methodInhaling directly is rougher on the lungs and limits/prevents users from taking larger and longer hitsUnless it is common for you to get highly pure methamphetamine, there is no filtering of additional adulterants that may be present as compared to using a water bong.__________________________________________________ ______________The Optimal MethodThis method requires:A Water Bong (Makeshift or Glass is fine) including glass stem (no bowl tip)Standard 6 inch Test TubeJet Butane Lighter (BIC-type lighters may be used but jet is preferable)Basic Methodology:Place the portion of methamphetamine intended for smoking inside the test tubeYou should aim for the methamphetamine to be placed somewhere around the middle of the test tubeIf the amount you have placed is large, try to spread the methamphetamine out such that there isn't a thick mound. An even surface area allows for even heating and therefore melting.Holding the closed end of the test tube with one hand, lift it up horizontally.Equip your free hand with your lighter, and proceed to heat the methamphetamine in the test tube.As the methamphetamine melts, turn the test tube right and left, so that the liquid spreads across an even surface area.Once reasonably spread out, allow the methamphetamine to cool and re-crystallize.To commence smoking, equip your methamphetamine bong.Holding the closed-end of the test tube, bring the front opening of the test tube towards the glass stem (without a bowl) of the bong.Position the glass stem of the bong inside the test tube near the re-crystallized methamphetamine. Try to stay about 3-5cm away from the methamphetamine.The meth bong is meant to be stationary preferably on a stable platform.One hand should be holding the end tip of the test tube that the glass stem is now in.The other hand controls the lighter.To begin smoking, start lighting the re-crystallized methamphetamine in the middle of the test tube.As it melts, rotate the test tube slowly in either the right or left direction. Rotate only one way and not both ways. So, rotate in a circular motion.As you rotate the methamphetamine in the test tube, start inhaling through the bong.
After satisfied with your drag, stop heating the test tube and allow the methamphetamine to cool.
Repeat process when ready to smoke again.
Some Important Pointers:
The most important element lies in the rotation of the methamphetamine while heating it in liquid form.
If you are using a jet lighter, the strength of the flame doesn't even matter as long as you rotate correctly.
Using a normal BIC-type lighter will require a slightly higher learning curve as the flame shouldn't touch the glass and heating isn't as even or efficient.
Try not to let the methamphetamine flow too far at either the end or front of the test tube.
If it goes to far towards the end where your fingers are, heating it might prove troublesome as it might be too hot for you to hold.
The front opening of the test tube is best supported by the glass stem of the bong for balanced control during rotation. Therefore, you do not want the methamphetamine to flow too much towards the front either
When rotating, try to keep the test tube at an even level.
Should you find the methamphetamine reaching too far backwards or forwards, during rotation, you may angle the test tube upwards or downwards, depending on the direction you want it to flow.
Always heat the tip of the re-crystallized methamphetamine in the direction you want it to flow when melted. Rotate in the opposite direction. For example, if you want the methamphetamine to flow leftwards in the test tube, heat the left part of the re-crystallized methamphetamine and rotate the test tube clockwise.

Why this Method is Optimal?

It is flexible and caters to whichever amount a user requires or is accustomed to smoking.
Any flame and any type of lighter can be used. There is no need to worry about having too big a flame and risk burning the methamphetamine.
Users are able to do longer continuous burns without risking burnt methamphetamine
The test tube has a closed end, which prevents any methamphetamine smoke from escaping should a user feel out of breath and stops inhaling too early.
Can be easily set up with every day items found in local stores instead of trying to forage for illegal meth pipes or meth bongs.
The next 2 points become relevant after reading the next section below:
Practicing and perfecting this method will result in being able to perform optimal drags, making optimal use of the product
Unlocks special techniques which can only be performed using this method.
__________________________________________________ ______________

The Art of Smoking

Performing an optimal drag is dependent on several key factors.

The amount of methamphetamine used isn't really a critical factor, as there is no optimal amount of methamphetamine to be used, only the optimal method to smoke whatever amount is used, as the principles remain the same regardless the amount.

The 3 core factors are:
The rate at which the methamphetamine cools
The efficiency of air flow
The length and strength of inhalation
Understanding how these 3 factors are interdependent with each other is the key to mastering the art of smoking.

Methamphetamine in crystal form is in the solid state of matter. Exposed to heat, it melts and changes to the liquid state of matter. When heated to its melting point, it becomes the gaseous state of matter.

The methamphetamine vapors are really invisible, much like water vapor when water has been heated past to its boiling point. Similar to the steam that is produced when water vapor is cooled by the surround air, the methamphetamine vapors cools from the air flow produced when you inhale, creating the white smoke we are all familiar with.

The length and strength of inhalation is inversely correlated though. The stronger the inhalation, the shorter the duration and vice versa. Therefore, finding the optimal balance between inhalation length and strength is critical as inhalation affects the efficiency of air flow which in turn affects the rate at which the methamphetamine cools, which of course affects the amount of methamphetamine smoke produced.

Once this core inter-relationship is properly understood, read on for advanced pointers and techniques.

Advanced Pointers

Optimal Inhalation
The key to longer drags lies in using just the right strength to inhale. Too much strength results in you filling your lung with air, reducing its capacity to take more methamphetamine smoke. Too little strength and you fail to generate sufficient air flow for a decent drag.
The strength of inhalation can be optimized by reducing the distance between the glass stem, and the methamphetamine in the test tube. The further the glass stem is from the methamphetamine, the stronger the breath required to inhale.
While easy to position close to the methamphetamine in solid form, the tricky part is holding the position constant during liquid form coupled with rotation of the test tube.
One should be familiar with the amount of methamphetamine used, good rotation technique and how the liquid flows in the test tube before attempting this.
Optimal Airflow

During inhalation, the glass stem should be angled in either the right or left direction rather than straight when placed in the test tube.
Therefore, either angle to tip of the glass stem to the right against right wall of the test tube, or left towards the left wall of the test tube.
An opposing force should b