79 Error Turn off then onDescriptio

79 Error Turn off then on
Description

The product has experienced an internal firmware error.

Recommended action

Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.

If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.

If the message persists, contact HP support.


79 Service error Turn off then on
Description

An incompatible DIMM is installed.

Recommended action

Turn the product power off.
Install a DIMM that the product supports.
Turn the product on.
If the message persists, contact HP support.


Black cartridge low
Description

The toner cartridge is nearing the end of its useful life.

Recommended action

Printing can continue, but consider having a replacement toner cartridge available.


Black cartridge very low
Description

The toner cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, 400 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.

Recommended action

To ensure optimal print quality, HP recommends replacing the toner cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.

Once an HP toner cartridge has reached very low, HP's Premium Protection Warranty on that toner cartridge has ended. All print defects or cartridge failures incurred when an HP toner cartridge is used in continue at very low mode will not be considered to be defects in materials or workmanship in the toner cartridge under the HP Print Cartridge Warranty Statement.


Cleaning
Description

The product periodically performs a cleaning procedure to maintain the best print quality.

Recommended action

Wait for the cleaning process to finish.


Device error Press [OK]
Description

An internal error occurred.

Recommended action

Press the OK button to resume the job.


Door open
Description

The product front door is open.

Recommended action

Close the door.


Genuine HP supply installed
Description

A genuine HP supply was installed.

Recommended action

No action necessary.


Install black cartridge
Description

The toner cartridge is either not installed or not correctly installed in the product.

Recommended action

Install the toner cartridge.


Invalid driver Press [OK]
Description

You are using an incorrect print driver.

Recommended action

Select the correct print driver.


Jam in
Description

The product has detected a jam.

Recommended action

Clear the jam from the location indicated. The job should continue to print. If it does not, try reprinting the job.

If the message persists, contact HP support.


Jam in Tray Clear jam and then Press [OK]
Description

The product has detected a jam.

Recommended action

Clear the jam from the location indicated, and then press OK .

If the message persists, contact HP support.


Load tray 1 ,
Description

No trays are configured for the paper type and size that the print job is requesting.

Recommended action

Load the correct paper into Tray 1, or press OK to use paper in a different tray.


Load tray 1 PLAIN Cleaning Mode
Description

The product is ready to process the cleaning operation.

Recommended action

Load Tray 1 with plain paper in the size indicated, and then press the OK button.


Load tray Press [OK] for available media
Description

The tray is empty.

Recommended action

Load paper into the tray to continue printing. Press the OK button to select a different tray.


Load tray
Description

A tray is configured for the paper type and size that the print job is requesting, but that tray is empty.

Recommended action

Load the correct paper into the tray, or press the OK button to use paper in a different tray.


Manual duplex Load tray Press [OK]
Description

The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.

Recommended action

Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you, and then press the OK button.


Manual feed , Press [OK] for available media
Description

The product is set for manual feed mode.

Recommended action

Press the OK button to clear the message or load the correct paper into Tray 1.


Memory is low Press [OK]
Description

The product memory is almost full.

Recommended action

Press the OK button to finish the job, or press the Cancel button to cancel the job.

Break the job into smaller jobs that contain fewer pages.


Misprint Press [OK]
Description

Paper has been delayed as it moves through the product.

Recommended action

Press the OK button to clear the message.

To avoid this problem, try the following solutions:

Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against the back edge of the tray.
Use paper that meets HP specifications. Store paper unopened in its original packaging.
Use the product in an area that meets the environmental specifications for this product.

Print failure, press OK. If error repeats, turn off then on.
Description

The product cannot process the page.

Recommended action

Press the OK button to continue printing the job, but output might be affected.

If the error persists, turn the power off and then on. Resend the print job.


Rear door open
Description

The product rear door is open.

Recommended action

Close the door.


Remove shipping material from toner cartridge
Description

A toner cartridge shipping lock is installed.

Recommended action

Pull the orange tab to remove the shipping lock from the cartridge.


Replace black cartridge
Description

The toner cartridge is at the end of its useful like, and the product is customer-configured to stop printing when it reaches the very low state.

Recommended action

To ensure optimal print quality, HP recommends replacing the toner cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary. Once an HP toner cartridge has reached very low, HP's Premium Protection Warranty on that toner cartridge has ended. All print defects or cartridge failures incurred when an HP toner cartridge is used in continue at very low mode will not be considered to be defects in materials or workmanship in the toner cartridge under the HP Print Cartridge Warranty Statement.


Supplies low
Description

A toner cartridge is low.

Recommended action

Printing will continue until a Very Low message displays. Consider having a replacement toner cartridge available.


Unexpected size in tray Load Press [OK]
Description

The product has detected paper in the tray that does not match the configuration for the tray.

Recommended action

Load the correct paper into the tray, or configure the tray for the size that you have loaded.


Unsupported black cartridge Press [OK] to continue
Description

The product has detected an installed toner cartridge that was not made by HP.

Recommended action

Press the OK button to continue printing.

If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit . Service or repairs that are required as a result of using unsupported supplies are not covered under HP warranty.


Used black cartridge is installed Press [OK] to continue
Description

You are using a toner cartridge that reached the default low threshold while it was installed in another product.

Recommended action

Press the OK button to clear the message. Printing can continue, but consider having a replacement toner cartridge available.

Kết quả (Việt) 1:

79 lỗi lần lượt tắt sau đó ngàyMô tảSản phẩm đã có kinh nghiệm một lỗi bên trong phần vững.Hành động được đề nghịTắt điện sản phẩm, chờ ít nhất 30 giây, và sau đó bật sức mạnh của sản phẩm và chờ cho nó để khởi tạo.Nếu bạn đang sử dụng một bảo vệ tăng xung áp, loại bỏ nó. Cắm sản phẩm trực tiếp vào ổ cắm tường. Bật sức mạnh của sản phẩm.Nếu tin nhắn vẫn còn, liên hệ với HP hỗ trợ.79 vụ lỗi lần lượt tắt sau đó ngàyMô tảMột DIMM không tương thích được cài đặt.Hành động được đề nghịTắt điện sản phẩm.Cài đặt một DIMM sản phẩm hỗ trợ.Bật các sản phẩm.Nếu tin nhắn vẫn còn, liên hệ với HP hỗ trợ.Hộp mực đen thấpMô tảCartridge mực gần kết thúc cuộc sống hữu ích của nó.Hành động được đề nghịIn ấn có thể tiếp tục, nhưng xem xét việc có một hộp mực toner thay thế có sẵn.Hộp mực đen rất thấpMô tảCartridge mực là lúc kết thúc cuộc sống hữu ích của nó. Một lựa chọn cấu hình của khách hàng về sản phẩm này là "nhắc nhở tôi trong 100 trang, 200 trang, 300 trang, 400 trang, hoặc không bao giờ." Tùy chọn này được cung cấp như là một sự thuận tiện của khách hàng và không phải là một dấu hiệu cho thấy các trang này sẽ có thể chấp nhận được chất lượng in.Hành động được đề nghịĐể đảm bảo tối ưu chất lượng in, HP khuyến cáo thay thế cartridge mực tại thời điểm này. Bạn có thể tiếp tục in cho đến khi bạn nhận thấy một sự giảm xuống trong chất lượng in. Hộp mực thực tế cuộc sống có thể khác nhau.Một khi một mực mực HP đã đạt rất thấp, HP Premium bảo vệ bảo hành trên đó cartridge mực đã kết thúc. Tất cả các khiếm khuyết in hoặc mực lỗi phát sinh khi một mực mực HP được sử dụng trong tiếp tục tại rất thấp chế độ sẽ không thể được coi là các khiếm khuyết trong vật liệu hoặc tay nghề trong cartridge mực theo tuyên bố in HP bảo hành mực.Làm sạchMô tảSản phẩm theo định kỳ thực hiện một quy trình làm sạch để duy trì tốt nhất in chất lượng.Hành động được đề nghịChờ đợi cho quá trình làm sạch để kết thúc.Lỗi thiết bị báo chí [OK]Mô tảLỗi nội bộ đã xảy ra.Hành động được đề nghịNhấn nút OK để tiếp tục công việc.Mở cửaMô tảSản phẩm cửa được mở.Hành động được đề nghịĐóng cửa.Chính hãng HP cung cấp cài đặtMô tảMột nguồn cung cấp chính hãng HP đã được cài đặt.Hành động được đề nghịKhông có hành động cần thiết.Cài đặt mực màu đenMô tảCartridge mực đã không được cài đặt hoặc cài đặt không chính xác trong sản phẩm.Hành động được đề nghịCài đặt mực mực.Chương trình điều khiển không hợp lệ, nhấn [OK]Mô tảBạn đang sử dụng một trình điều khiển in không đúng.Hành động được đề nghịChọn trình điều khiển in chính xác.Mứt ở Mô tảSản phẩm đã phát hiện một ách tắc.Hành động được đề nghịRõ ràng các ách tắc từ vị trí chỉ định. Công việc có nên tiếp tục để in. Nếu không, hãy thử in lại công việc.Nếu tin nhắn vẫn còn, liên hệ với HP hỗ trợ.Jam rõ ràng khay mứt và sau đó nhấn [OK]DescriptionThe product has detected a jam.Recommended actionClear the jam from the location indicated, and then press OK .If the message persists, contact HP support.Load tray 1 , DescriptionNo trays are configured for the paper type and size that the print job is requesting.Recommended actionLoad the correct paper into Tray 1, or press OK to use paper in a different tray.Load tray 1 PLAIN Cleaning ModeDescriptionThe product is ready to process the cleaning operation.Recommended actionLoad Tray 1 with plain paper in the size indicated, and then press the OK button.Load tray Press [OK] for available mediaDescriptionThe tray is empty.Recommended actionLoad paper into the tray to continue printing. Press the OK button to select a different tray.Load tray DescriptionA tray is configured for the paper type and size that the print job is requesting, but that tray is empty.Recommended actionLoad the correct paper into the tray, or press the OK button to use paper in a different tray.Manual duplex Load tray Press [OK]DescriptionThe first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.Recommended actionLoad the page in the indicated tray with the side to be printed face up, and the top of the page away from you, and then press the OK button.Manual feed , Press [OK] for available mediaDescriptionThe product is set for manual feed mode.Recommended actionPress the OK button to clear the message or load the correct paper into Tray 1.Memory is low Press [OK]DescriptionThe product memory is almost full.Recommended actionPress the OK button to finish the job, or press the Cancel button to cancel the job.Break the job into smaller jobs that contain fewer pages.Misprint Press [OK]DescriptionPaper has been delayed as it moves through the product.Recommended actionPress the OK button to clear the message.To avoid this problem, try the following solutions:Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against the back edge of the tray.Use paper that meets HP specifications. Store paper unopened in its original packaging.Use the product in an area that meets the environmental specifications for this product.Print failure, press OK. If error repeats, turn off then on.DescriptionThe product cannot process the page.Recommended actionPress the OK button to continue printing the job, but output might be affected.If the error persists, turn the power off and then on. Resend the print job.Rear door openDescriptionThe product rear door is open.Recommended actionClose the door.Remove shipping material from toner cartridgeDescriptionA toner cartridge shipping lock is installed.Recommended actionPull the orange tab to remove the shipping lock from the cartridge.Replace black cartridgeDescriptionThe toner cartridge is at the end of its useful like, and the product is customer-configured to stop printing when it reaches the very low state.Recommended actionTo ensure optimal print quality, HP recommends replacing the toner cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary. Once an HP toner cartridge has reached very low, HP's Premium Protection Warranty on that toner cartridge has ended. All print defects or cartridge failures incurred when an HP toner cartridge is used in continue at very low mode will not be considered to be defects in materials or workmanship in the toner cartridge under the HP Print Cartridge Warranty Statement.Supplies lowDescriptionA toner cartridge is low.Recommended actionPrinting will continue until a Very Low message displays. Consider having a replacement toner cartridge available.Unexpected size in tray Load Press [OK]DescriptionThe product has detected paper in the tray that does not match the configuration for the tray.Recommended actionLoad the correct paper into the tray, or configure the tray for the size that you have loaded.Unsupported black cartridge Press [OK] to continueDescriptionThe product has detected an installed toner cartridge that was not made by HP.Recommended actionPress the OK button to continue printing.If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit . Service or repairs that are required as a result of using unsupported supplies are not covered under HP warranty.Used black cartridge is installed Press [OK] to continueDescriptionYou are using a toner cartridge that reached the default low threshold while it was installed in another product.Recommended actionPress the OK button to clear the message. Printing can continue, but consider having a replacement toner cartridge available.