MAC level.Thus, it is at the MAC level that a bridge can function. Fig dịch - MAC level.Thus, it is at the MAC level that a bridge can function. Fig Việt làm thế nào để nói

MAC level.Thus, it is at the MAC le

MAC level.Thus, it is at the MAC level that a bridge can function. Figure 15.9 shows
the simplest case, which consists of two LANs connected by a single bridge. The
LANs employ the same MAC and LLC protocols.The bridge operates as previously
described. A MAC frame whose destination is not on the immediate LAN is captured
by the bridge, buffered briefly, and then transmitted on the other LAN. As far
as the LLC layer is concerned, there is a dialogue between peer LLC entities in the
two endpoint stations. The bridge need not contain an LLC layer because it is
merely serving to relay the MAC frames.
Figure 15.9b indicates the way in which data are encapsulated using a bridge.
Data are provided by some user to LLC. The LLC entity appends a header and
passes the resulting data unit to the MAC entity, which appends a header and a
trailer to form a MAC frame. On the basis of the destination MAC address in the
frame, it is captured by the bridge. The bridge does not strip off the MAC fields; its
function is to relay the MAC frame intact to the destination LAN. Thus, the frame
is deposited on the destination LAN and captured by the destination station.
The concept of a MAC relay bridge is not limited to the use of a single bridge
to connect two nearby LANs. If the LANs are some distance apart, then they can be
connected by two bridges that are in turn connected by a communications facility.
The intervening communications facility can be a network, such as a wide area
packet-switching network, or a point-to-point link. In such cases, when a bridge captures
a MAC frame, it must encapsulate the frame in the appropriate packaging and
transmit it over the communications facility to a target bridge. The target bridge
strips off these extra fields and transmits the original, unmodified MAC frame to the
destination station.
Fixed Routing
There is a trend within many organizations to an increasing number of LANs interconnected
by bridges. As the number of LANs grows, it becomes important to
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
MAC level.Thus, it is at the MAC level that a bridge can function. Figure 15.9 showsthe simplest case, which consists of two LANs connected by a single bridge. TheLANs employ the same MAC and LLC protocols.The bridge operates as previouslydescribed. A MAC frame whose destination is not on the immediate LAN is capturedby the bridge, buffered briefly, and then transmitted on the other LAN. As faras the LLC layer is concerned, there is a dialogue between peer LLC entities in thetwo endpoint stations. The bridge need not contain an LLC layer because it ismerely serving to relay the MAC frames.Figure 15.9b indicates the way in which data are encapsulated using a bridge.Data are provided by some user to LLC. The LLC entity appends a header andpasses the resulting data unit to the MAC entity, which appends a header and atrailer to form a MAC frame. On the basis of the destination MAC address in theframe, it is captured by the bridge. The bridge does not strip off the MAC fields; itsfunction is to relay the MAC frame intact to the destination LAN. Thus, the frameis deposited on the destination LAN and captured by the destination station.The concept of a MAC relay bridge is not limited to the use of a single bridgeto connect two nearby LANs. If the LANs are some distance apart, then they can beconnected by two bridges that are in turn connected by a communications facility.The intervening communications facility can be a network, such as a wide areapacket-switching network, or a point-to-point link. In such cases, when a bridge capturesa MAC frame, it must encapsulate the frame in the appropriate packaging andtransmit it over the communications facility to a target bridge. The target bridgestrips off these extra fields and transmits the original, unmodified MAC frame to thedestination station.Fixed RoutingThere is a trend within many organizations to an increasing number of LANs interconnectedby bridges. As the number of LANs grows, it becomes important to
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
MAC level.Thus, nó là ở cấp MAC rằng một cây cầu có thể hoạt động. Hình 15.9 cho thấy
các trường hợp đơn giản nhất, trong đó bao gồm hai mạng LAN kết nối bằng một cây cầu duy nhất. Các
mạng LAN sử dụng các cầu MAC và LLC protocols.The cùng hoạt động như trước đây
mô tả. Một khung MAC mà không phải là điểm đến trong mạng LAN trước mắt là bị bắt
bởi cây cầu, đệm một thời gian ngắn, và sau đó được truyền trên mạng LAN khác. Như xa
như lớp LLC là có liên quan, có một cuộc đối thoại giữa các đơn vị cùng cấp LLC tại
hai trạm đầu cuối. Cây cầu không cần phải có một lớp LLC vì nó
chỉ đơn thuần phục vụ để chuyển tiếp các khung MAC.
Hình 15.9b chỉ ra cách thức mà dữ liệu được đóng gói bằng cách sử dụng một cây cầu.
Dữ liệu được cung cấp bởi một số người dùng để LLC. Thực thể LLC gắn thêm một header và
vượt qua các đơn vị dữ liệu dẫn đến các thực thể MAC, mà gắn thêm header và
trailer để tạo thành một khung MAC. Trên cơ sở của địa chỉ MAC đích trong
khung hình, nó được chụp bởi cây cầu. Cây cầu không lột các lĩnh vực MAC; của nó
là chức năng để chuyển tiếp các khung MAC còn nguyên vẹn đến đích LAN. Như vậy, khung
được lắng đọng trên LAN đích và bắt giữ bởi trạm đích.
Các khái niệm về một cây cầu tiếp sức MAC không giới hạn việc sử dụng một cây cầu duy nhất
để kết nối hai mạng LAN ở gần đó. Nếu các mạng LAN là một số khoảng cách xa nhau, sau đó chúng có thể được
kết nối bởi hai cây cầu đó là lần lượt nối với nhau bằng một cơ sở thông tin liên lạc.
Các cơ sở truyền thông can thiệp có thể là một mạng, chẳng hạn như là một khu vực rộng
mạng packet-switching, hoặc một điểm đến link -point. Trong trường hợp như vậy, khi một cây cầu chụp
một khung MAC, nó phải gói gọn trong khung trong bao bì thích hợp và
truyền tải nó trên các thiết bị thông tin liên lạc đến một cây cầu mục tiêu. Các cầu mục tiêu
dải tắt các trường bổ sung và truyền ban đầu, chưa sửa đổi khung MAC đến
trạm đích.
Cố định Routing
Có một xu hướng trong các tổ chức cho một số lượng ngày càng tăng của các mạng LAN kết nối với nhau
bằng cầu. Khi số lượng các mạng LAN phát triển, nó quan trọng để trở thành
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: