The J801 alarm appears only when active machinery time exceed 4 hours  dịch - The J801 alarm appears only when active machinery time exceed 4 hours  Việt làm thế nào để nói

The J801 alarm appears only when ac

The J801 alarm appears only when active machinery time exceed 4 hours for full PTI mode.

Requirements: Control temperature must be at least 7.2C (45F)
Setup: The set point is changed to -17.8C (0F). The system will then attempt to
pull down the control temperature to set point using normal frozen mode cooling.
During this test, the control temperate will be shown on the right display.
Pass/Fail Criteria: If the control temperature does not reach set point -0.3C
(0.17F) before the 180--minute timer expires the test fails and will auto-repeat by
starting P10-0 over.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
The J801 alarm appears only when active machinery time exceed 4 hours for full PTI mode.Requirements: Control temperature must be at least 7.2C (45F)Setup: The set point is changed to -17.8C (0F). The system will then attempt topull down the control temperature to set point using normal frozen mode cooling.During this test, the control temperate will be shown on the right display.Pass/Fail Criteria: If the control temperature does not reach set point -0.3C(0.17F) before the 180--minute timer expires the test fails and will auto-repeat bystarting P10-0 over.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
Các báo J801 chỉ xuất hiện khi thời gian máy hoạt động quá 4 giờ cho chế độ PTI đầy đủ. Yêu cầu: nhiệt độ kiểm soát phải có ít nhất 7.2C (45F) Setup: Điểm tập được thay đổi để -17.8C (0F). Sau đó hệ thống sẽ cố gắng kéo xuống kiểm soát nhiệt độ để thiết lập điểm sử dụng chế độ đông lạnh thường làm mát. Trong thử nghiệm này, ôn kiểm soát sẽ được hiển thị trên màn hình hiển thị bên phải. Pass / Fail Tiêu chí: Nếu nhiệt độ điều khiển không đạt điểm đặt - 0.3C (0.17F) trước 180 - hẹn giờ phút hết hạn thử nghiệm thất bại và sẽ tự động lặp lại bởi bắt đầu từ P10-0 hơn.







đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: