A good general discussion of the optical properties of materialscan be dịch - A good general discussion of the optical properties of materialscan be Việt làm thế nào để nói

A good general discussion of the op

A good general discussion of the optical properties of materials
can be found in Hecht (2001). A more advanced
treatment may be found in Born and Wolf (1999). The
discussion of the optical properties of different materials
given in Section 1.4 will be expanded in subsequent
chapters, where suitable further reading will be suggested.
The exception is the discussion of glasses, which are only
covered briefly elsewhere in this book. A more detailed
discussion of the optical properties of different types of
glass may be found in Krause (2005) or Bach and Neuroth
(1995).
The relationship between the optical properties and
the complex refractive index and dielectric constant is
discussed in most texts on electromagnetism, for example,
Bleaney and Bleaney (1976), or Lorrain, Corson, and
Lorrain (2000). This material is also covered in Born and
Wolf (1999).
A classic discussion of the effects of the point group
symmetry on the physical properties of crystals is given
in Nye (1985).
Exercises
(1.1) Crown glass has a refractive index of 1.51 in the
visible spectral region. Calculate the reflectivity of
the air–glass interface, and the transmission of a
typical glass window.
(1.2) Use the data in Table 1.4 to calculate the ratio
of the reflectivities of fused silica and dense flint
glass.
(1.3) The complex dielectric constant of the semiconductor
cadmium telluride is given by ˜r = 8.92 +
i 2.29 at 500 nm. Calculate for CdTe at this wavelength:
the phase velocity of light, the absorption
coefficient and the reflectivity.
(1.4) The detectors used in optical fibre networks operating
at 850nm are usually made from silicon,
which has an absorption coefficient of 1.3×105 m
−1
at this wavelength. The detectors have coatings on
the front surface that makes the reflectivity at the
design wavelength negligibly small. Calculate the
thickness of the active region of a photodiode designed
to absorb 90% of the light.
(1.5) GaAs has a refractive index of 3.68 and an absorption
coefficient of 1.3 × 106 m
−1
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
A good general discussion of the optical properties of materialscan be found in Hecht (2001). A more advancedtreatment may be found in Born and Wolf (1999). Thediscussion of the optical properties of different materialsgiven in Section 1.4 will be expanded in subsequentchapters, where suitable further reading will be suggested.The exception is the discussion of glasses, which are onlycovered briefly elsewhere in this book. A more detaileddiscussion of the optical properties of different types ofglass may be found in Krause (2005) or Bach and Neuroth(1995).The relationship between the optical properties andthe complex refractive index and dielectric constant isdiscussed in most texts on electromagnetism, for example,Bleaney and Bleaney (1976), or Lorrain, Corson, andLorrain (2000). This material is also covered in Born andWolf (1999).A classic discussion of the effects of the point groupsymmetry on the physical properties of crystals is givenin Nye (1985).Exercises(1.1) Crown glass has a refractive index of 1.51 in thevisible spectral region. Calculate the reflectivity ofthe air–glass interface, and the transmission of atypical glass window.(1.2) Use the data in Table 1.4 to calculate the ratioof the reflectivities of fused silica and dense flintglass.(1.3) The complex dielectric constant of the semiconductorcadmium telluride is given by ˜r = 8.92 +i 2.29 at 500 nm. Calculate for CdTe at this wavelength:the phase velocity of light, the absorptioncoefficient and the reflectivity.(1.4) The detectors used in optical fibre networks operatingat 850nm are usually made from silicon,which has an absorption coefficient of 1.3×105 m−1at this wavelength. The detectors have coatings onthe front surface that makes the reflectivity at thedesign wavelength negligibly small. Calculate thethickness of the active region of a photodiode designedto absorb 90% of the light.(1.5) GaAs has a refractive index of 3.68 and an absorptioncoefficient of 1.3 × 106 m−1
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
Một cuộc thảo luận tốt chung của các tính chất quang của vật liệu
có thể được tìm thấy trong Hecht (2001). Một nâng cao hơn
điều trị có thể được tìm thấy tại Born and Wolf (1999). Các
cuộc thảo luận về các tính chất quang học của vật liệu khác nhau
được đưa ra trong mục 1.4 sẽ được mở rộng tiếp theo
chương, nơi đọc thêm phù hợp sẽ được đề nghị.
Các trường hợp ngoại lệ là các cuộc thảo luận về kính, mà chỉ được
bao phủ một thời gian ngắn ở những nơi khác trong cuốn sách này. Một chi tiết
cuộc thảo luận về các tính chất quang học của các loại khác nhau của
thủy tinh có thể được tìm thấy trong Krause (2005) hay Bạch và Neuroth
(1995).
Các mối quan hệ giữa các thuộc tính quang học và
các chỉ số khúc xạ phức tạp và hằng số điện môi được
thảo luận trong hầu hết các văn bản về điện Ví dụ,
Bleaney và Bleaney (1976), hoặc Lorrain, Corson, và
Lorrain (2000). Tài liệu này cũng được bao phủ trong Sinh ra và
Wolf (1999).
Một cuộc thảo luận cổ điển của các tác động của các nhóm điểm
đối xứng trên các tính chất vật lý của tinh thể được đưa ra
trong Nye (1985).
Các bài tập
(1.1) Thái thủy tinh có chiết suất bằng 1,51 trong
vùng quang phổ nhìn thấy được. Tính toán hệ số phản xạ của
giao diện máy thủy tinh, và việc truyền tải một
cửa sổ kính thông thường.
(1.2) Sử dụng các dữ liệu trong Bảng 1.4 để tính toán tỷ lệ
của hệ số phản xạ của silic đã nung chảy và đá lửa dày đặc
kính.
(1.3) Các hằng số điện môi phức tạp của chất bán dẫn
cadmium telluride được cho bởi ~? r = 8,92 +
i 2.29 ở 500 nm. Tính toán cho CdTe tại bước sóng này:
vận tốc pha của ánh sáng, sự hấp thu
hệ số và hệ số phản xạ.
(1.4) Các máy dò được sử dụng trong các mạng sợi quang hoạt động
tại 850nm thường được làm từ silicon,
trong đó có một hệ số hấp thụ 1,3 × 105 m
- 1
tại bước sóng này. Các máy dò có lớp phủ trên
bề mặt phía trước mà làm cho các phản xạ ở
bước sóng thiết kế không đáng kể. Tính
độ dày của các khu vực hoạt động của một photodiode được thiết kế
để hấp thụ 90% ánh sáng.
(1.5) GaAs có chiết suất 3,68 và hấp thụ một
hệ số 1,3 × 106 m
-1
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: