(1) Break open the inhalers, a pair of real sharp scissors does this g dịch - (1) Break open the inhalers, a pair of real sharp scissors does this g Việt làm thế nào để nói

(1) Break open the inhalers, a pair

(1) Break open the inhalers, a pair of real sharp scissors does this good.
Place the cottons that were inside in a jar and close the lid. (Remember you
use all 12 cottons.)

(2) In the bowl, combine 1- 1/3 oz. water and 2/3 oz. muriatic acid. Shred
cottons in this solution, and knead for 5 minutes with hands. (ALWAYS BE SURE
THERE'S CLEAN RUBBER GLOVES on your hands.) You can do it bare-handed if you've
got tough skin. Squeeze all juice out of filters after you knead, and throw
em away.

(3) Filter the remaining liquid into the quart jar. It will be necessary to do
this several times to get that awful smelling oil out. The chemicals in the
inhalers have been bonded to the HCl, and the oils have been filtered off.
Throw the filters away.

(4) Pour enough of the solution into a small bottle to fill it 1/3 full. Save
any leftover juice for the second batch.

(5) Pour 1/4 teaspoon of the lye crystals into the bottle and agitate. Do this
carefully, as the mixture will become hot, and give off a gas. Repeat this
step until the mixture remains cloudy.

(6) Fill the bottle from step (5) up the rest of the way with ether. Cap the
bottle, and agitate for about 8 minutes. It is very important to expose every
molecule of the free-base to the ether for as long as possible.

(7) Let the mixture settle. There will be a middle layer that is very thick.
Tap the side of the bottle to get this layer as thin as possible.

(8) Remove the top layer with the eyedropper, being careful not to get any of
the middle layer in it. Save the top layer, and throw the rest away.

(9) Fill a bottle half-way with water, and about 10 drops of acid. Pour the
top layer from step (8) into the bottle, and cap it. Shake the bottle for 2
minutes. When it settles, remove the top layer and throw it away. The free
base has now been bonded to the HCl/water mixture.

(10) If there is anything left from step (3), repeat the procedure with it.

(11) Evaporate the solution in the Pyrex dish on low heat. You can do this on
the stove, but I have found that if you leave it on top of a hot-water heater
(like the one that supplies hot water to your house) for about 2-3 days, the
remaining crystals will be Methamphetamine.

Some notes:

Police are now calling this the "New Cocaine".

It is very easy to become delirious off the ether fumes, so be sure you are
well ventilated, I mean it!!!

Small, aspirin, or experiment bottles seem to work the best for smaller
batches. The measurements are not exact, so you don't have to be either.

In step 9, be sure you don't use too much water. Remember, this is the water
you have to use to evaporate.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
(1) phá vỡ mở các thuốc hít, một cặp kéo thực sự sắc nét hiện này tốt.
đặt khoáng đã bên trong trong một chai và đóng nắp. (Hãy nhớ bạn
sử dụng tất cả 12 khoáng.)

(2) trong bát, kết hợp 1-1/3 oz. nước và 2/3 oz. muriatic acid. Cắt nhỏ
khoáng trong giải pháp này, và xoa bóp cho 5 phút với hai bàn tay. (Luôn luôn chắn
có là sạch găng tay cao su trên bàn tay của bạn.) Bạn có thể làm điều đó trần – trao cho nếu bạn đã
có da cứng rắn. Siết chặt tất cả nước ra khỏi bộ lọc sau khi xoa bóp, và ném
em away.

(3) lọc chất lỏng còn lại vào bình lít. Nó sẽ được cần thiết để làm
này nhiều lần để ra rằng dầu có mùi khủng khiếp. Các hóa chất trong các
thuốc hít đã được liên kết với HCl, và các loại dầu đã là lọc đầu
ném các bộ lọc đi.

(4) đổ đủ của giải pháp vào một chai nhỏ để điền vào nó 1/3 đầy đủ. Tiết kiệm
bất kỳ nước trái cây còn sót lại cho batch.

(5) thứ hai 1/4 muỗng cà phê của các tinh thể lye đổ vào chai và khuấy động. Làm điều này
cẩn thận, như hỗn hợp sẽ trở nên nóng, và cung cấp cho ra một chất khí. Lặp lại điều này
bước cho đến khi hỗn hợp vẫn còn cloudy.

(6) điền vào chai từ bước (5) phần còn lại của quá trình với ête. Cap các
chai, và khuấy động khoảng 8 phút. Nó là rất quan trọng để lộ mỗi
phân tử của các free-base để các ête cho tới chừng nào possible.

(7) cho hỗn hợp giải quyết. Sẽ có một lớp trung lưu là rất dày.
chạm mặt của chai để có được này lớp mỏng như possible.

(8) loại bỏ lớp trên cùng với eyedropper, được cẩn thận không để có được bất kỳ
lớp trung lưu trong nó. Lưu các lớp đầu trang, và ném phần còn lại away.

(9) điền vào một chai một nửa chiều với nước, và khoảng 10 giọt axit. Đổ các
đầu lớp từ bước (8) vào chai, và cap nó. Lắc chai cho 2
phút. Khi nó giải quyết, loại bỏ lớp trên cùng và vứt nó đi. Miễn phí
cơ sở có bây giờ được liên kết với mixture.

(10) HCl/nước, nếu có bất cứ điều gì trái từ bước (3), lặp lại các thủ tục với it.

(11) Evaporate giải pháp trong món ăn Pyrex trên lửa nhỏ. Bạn có thể làm điều này trên
bếp, nhưng tôi đã tìm thấy rằng nếu bạn để nó trên đầu trang của một máy nước nóng nóng
(như một nguồn cung cấp nước nóng để căn nhà của bạn) trong khoảng 2-3 ngày, các
còn tinh thể sẽ là Methamphetamine.

một số ghi chú:

cảnh sát bây giờ kêu gọi này "Mới Cocaine".

Nó là rất dễ dàng để trở thành delirious ra khói ête, do đó hãy chắc chắn bạn đang
thông gió tốt, tôi có nghĩa là nó!

Nhỏ, aspirin, hoặc thử nghiệm chai dường như làm việc tốt nhất cho nhỏ hơn
lô. Các số đo là không chính xác, vì vậy bạn không phải là một trong hai.

trong bước 9, hãy chắc chắn bạn không sử dụng quá nhiều nước. Hãy nhớ rằng, đây là nước
bạn có thể sử dụng để bay hơi.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
(1) Break open the inhalers, a pair of real sharp scissors does this good.
Place the cottons that were inside in a jar and close the lid. (Remember you
use all 12 cottons.)

(2) In the bowl, combine 1- 1/3 oz. water and 2/3 oz. muriatic acid. Shred
cottons in this solution, and knead for 5 minutes with hands. (ALWAYS BE SURE
THERE'S CLEAN RUBBER GLOVES on your hands.) You can do it bare-handed if you've
got tough skin. Squeeze all juice out of filters after you knead, and throw
em away.

(3) Filter the remaining liquid into the quart jar. It will be necessary to do
this several times to get that awful smelling oil out. The chemicals in the
inhalers have been bonded to the HCl, and the oils have been filtered off.
Throw the filters away.

(4) Pour enough of the solution into a small bottle to fill it 1/3 full. Save
any leftover juice for the second batch.

(5) Pour 1/4 teaspoon of the lye crystals into the bottle and agitate. Do this
carefully, as the mixture will become hot, and give off a gas. Repeat this
step until the mixture remains cloudy.

(6) Fill the bottle from step (5) up the rest of the way with ether. Cap the
bottle, and agitate for about 8 minutes. It is very important to expose every
molecule of the free-base to the ether for as long as possible.

(7) Let the mixture settle. There will be a middle layer that is very thick.
Tap the side of the bottle to get this layer as thin as possible.

(8) Remove the top layer with the eyedropper, being careful not to get any of
the middle layer in it. Save the top layer, and throw the rest away.

(9) Fill a bottle half-way with water, and about 10 drops of acid. Pour the
top layer from step (8) into the bottle, and cap it. Shake the bottle for 2
minutes. When it settles, remove the top layer and throw it away. The free
base has now been bonded to the HCl/water mixture.

(10) If there is anything left from step (3), repeat the procedure with it.

(11) Evaporate the solution in the Pyrex dish on low heat. You can do this on
the stove, but I have found that if you leave it on top of a hot-water heater
(like the one that supplies hot water to your house) for about 2-3 days, the
remaining crystals will be Methamphetamine.

Some notes:

Police are now calling this the "New Cocaine".

It is very easy to become delirious off the ether fumes, so be sure you are
well ventilated, I mean it!!!

Small, aspirin, or experiment bottles seem to work the best for smaller
batches. The measurements are not exact, so you don't have to be either.

In step 9, be sure you don't use too much water. Remember, this is the water
you have to use to evaporate.
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: