UNIT 2What´s inside a microcomputer?The nerve centre of a microcompute dịch - UNIT 2What´s inside a microcomputer?The nerve centre of a microcompute Việt làm thế nào để nói

UNIT 2What´s inside a microcomputer

UNIT 2
What´s inside a microcomputer?
The nerve centre of a microcomputer is the central processing unit, or CPU. This unit is built into a single microprocessor chip – an integrated circuit – which executes program instructions and supervises the computer`s overall operation. The unit consist of three main parts:
1) The Control Unit, which examines the instructions in the user’s program, interprets each instructions in the user’s program, interprets each instruction and causes the circuits and the rest of the components – disk drivers, monitor, etc. – to be activated to execute the functions specified;
2) The Arithmetic Logic Unit (ALU), which performs mathematical calculations (+, -, etc.) and logical operations (and, or, etc.);
3) The Registers, which are high-speed unit of memory used to store and control information. One of these registers is the Program Counter (PC) which keeps track of the next instruction to be performed in the main memory. Another is the Instruction Register (IR) which holds the instruction that is currently begin executed.
One area where microprocessors differ is in the amount of data – the number of bits – they can work with at a time. There are 8, 16, 32 and 64 bit processor. The computer’s internal architecture is evolving so quickly that the new 64 bit processors are able to address 4 billion times more information than a 32 bit system.
The programs and data which pass through the central processor must be loaded into the main memory (also called the internal memory) in order to be processed. Thus, when the user runs an application, the microprocessor looks for it on secondary memory devices (disks) and transfers a copy of the application into the RAM area. RAM (Random Access Memory) is temporary, i.e. its information is lost when the computer is turned off. However, the ROM section (Read only Memory) is permanent and contains instructions needed by the processor.
Most of today’s computers have internal expansion slots that allow users to install adapters include high-resolution graphics boards, memory expansion boards, and internal modems
The power and performance of a computer is partly determined by the speed of its microprocessor. A clock provides pulses at fixed intervals to measure and synchronize circuits and units. The clock speed is measured in MHZ (megahertz) and refers to the frequency at which pulses are emitted. For example, a PU running at 50 MHZ (50 million cycles per second) is likely to provide a very fast processing rate and will enable the computer to handle the most demanding applications.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
UNIT 2What´s inside a microcomputer?The nerve centre of a microcomputer is the central processing unit, or CPU. This unit is built into a single microprocessor chip – an integrated circuit – which executes program instructions and supervises the computer`s overall operation. The unit consist of three main parts: 1) The Control Unit, which examines the instructions in the user’s program, interprets each instructions in the user’s program, interprets each instruction and causes the circuits and the rest of the components – disk drivers, monitor, etc. – to be activated to execute the functions specified;2) The Arithmetic Logic Unit (ALU), which performs mathematical calculations (+, -, etc.) and logical operations (and, or, etc.);3) The Registers, which are high-speed unit of memory used to store and control information. One of these registers is the Program Counter (PC) which keeps track of the next instruction to be performed in the main memory. Another is the Instruction Register (IR) which holds the instruction that is currently begin executed.One area where microprocessors differ is in the amount of data – the number of bits – they can work with at a time. There are 8, 16, 32 and 64 bit processor. The computer’s internal architecture is evolving so quickly that the new 64 bit processors are able to address 4 billion times more information than a 32 bit system.The programs and data which pass through the central processor must be loaded into the main memory (also called the internal memory) in order to be processed. Thus, when the user runs an application, the microprocessor looks for it on secondary memory devices (disks) and transfers a copy of the application into the RAM area. RAM (Random Access Memory) is temporary, i.e. its information is lost when the computer is turned off. However, the ROM section (Read only Memory) is permanent and contains instructions needed by the processor.Most of today’s computers have internal expansion slots that allow users to install adapters include high-resolution graphics boards, memory expansion boards, and internal modems The power and performance of a computer is partly determined by the speed of its microprocessor. A clock provides pulses at fixed intervals to measure and synchronize circuits and units. The clock speed is measured in MHZ (megahertz) and refers to the frequency at which pulses are emitted. For example, a PU running at 50 MHZ (50 million cycles per second) is likely to provide a very fast processing rate and will enable the computer to handle the most demanding applications.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 3:[Sao chép]
Sao chép!
Đơn vị 2- gì bên trong không?Máy vi tính của hệ thần kinh trung ương là bộ xử lý trung tâm; hay CPU.Đơn vị này được xây dựng trên một con chip vi xử lý - một IC - thực hiện chương trình hướng dẫn và giám sát toàn bộ hoạt động của máy tính.Nên đơn vị bởi ba thành phần chính:1) điều khiển, kiểm tra hướng dẫn chương trình của chương trình người dùng, trong tất cả mọi người dùng để giải thích, giải thích mọi hướng dẫn và làm cho mạch điện và yếu tố – Disk, màn hình hiển thị nghỉ ngơi, đợi – bị kích hoạt thực hiện chức năng xác định;2) về số học đơn vị logic toán học (ALU), tiến hành hoạt động (+, -, etc.) và hoạt động lý (và, hoặc, etc.);3) đăng ký, đó là dùng để lưu trữ thông tin và kiểm soát bộ nhớ tốc độ cao của đơn vị.Một trong những đăng ký chương trình truy cập (PC), nó theo dõi ở trong bộ nhớ chính thực hiện câu lệnh tiếp theo.Một loại khác là hướng dẫn đăng ký (IR), nó bắt đầu thực hiện. Hiện tại chỉ thị nắm giữ.Vi xử lý khác nhau của một domain - bit dữ liệu số lượng là... Chúng có thể cùng một lúc làm việc.Có 8 bit, 16 bit, 32 bit và 64 bit bộ vi xử lý.Cấu trúc bên trong của máy tính phát triển rất nhanh chóng, mới có thể xử lý bộ vi xử lý 64 bit thông tin trên 40 triệu lần so với một hệ thống 32 - bit.Thông qua chương trình của CPU và bộ nhớ chính phải nạp dữ liệu ( cho bên trong bộ nhớ) mới bị xử lý.Vì vậy, khi người dùng chạy ứng dụng khi vi xử lý sẽ ở hai thiết bị bộ nhớ (đĩa) trên ứng dụng tìm kiếm và sẽ chuyển đến khu vực. Bản sao của RAM.Bộ nhớ truy cập ngẫu nhiên (RAM) là tạm thời, tức là khi máy tính khi nó đóng cửa thông tin;.Tuy nhiên, ROM phần (bộ nhớ chỉ đọc) là vĩnh viễn, và bộ xử lý bao gồm hướng dẫn cần thiết..Hầu hết các máy tính ngày nay có máy đánh bạc trong nội bộ mở rộng, cho phép người dùng cài đặt bao gồm high definition Graphics Adapter tấm ván, bộ nhớ mở rộng bên trong và bộ điều giảiHiệu suất của máy tính mạnh và ở một mức độ nào đó tùy thuộc vào tốc độ của vi xử lý.Đồng hồ đo khoảng thời gian cố định để cung cấp những xung mạch và đơn vị; và đồng bộ.Đồng hồ đo tốc độ GHz (MHz), có nghĩa là ở tần số xung phóng.Ví dụ, một trong 50 MHz (trên giây đồng hồ chạy 50 triệu lần) không rất có thể cung cấp một tốc độ xử lý rất nhanh, và có thể làm cho máy tính xử lý nghiêm khắc nhất của chương trình ứng dụng.
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: