Configuration elements as well as proper selection of wavelength to be dịch - Configuration elements as well as proper selection of wavelength to be Việt làm thế nào để nói

Configuration elements as well as p

Configuration elements as well as proper selection of wavelength to be utilized should be considered carefully when designing the optical transmission system.
The range of wavelength currently used widely is about 1.25µm-1.3µm. The wavelength having a range of 1.5µm-1.6µm is currently under development. In the band of 0.8µm wavelength, loss of optical fiber is greater than that of long wavelength range. GaAlAs(light source) and Si (light receiving element) being developed early, was commercialized in 1970s. On the other hand, in the band of 1.8µm wavelength, the loss of optical fiber is the lowest and since the material distribution of abastoes optical fiber is almost 0-is ideal for sending high speed and wideband information to farther places. The wavelength in the range of 1.5µm experiences the lowest loss. Accordingly, with successfully developing and commercializing a photo element for this range, a system with a regeneration distance of longer than 100km will be used. In actual applications, even if the optical fiber experiences low loss of 0.2dB/km, low loss characteristics is not utilized fully because of the increase in connection loss and material distribution.
The transmission speed of digital system and the transmission bandwidth of analog system are restricted by the type of optical fibers and light emitting elements used.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
Yếu tố cấu hình cũng như các lựa chọn thích hợp của các bước sóng để được sử dụng nên được xem xét cẩn thận khi thiết kế hệ thống truyền dẫn quang. Phạm vi của các bước sóng hiện đang được sử dụng rộng rãi là khoảng 1.25µm-1.3µm. Các bước sóng có một loạt các 1.5µm-1.6µm là hiện đang được phát triển. Trong ban nhạc 0.8µm bước sóng, mất mát của quang là lớn hơn nhiều bước sóng dài. GaAlAs (nguồn ánh sáng) và Si (ánh sáng nhận được yếu tố) được phát triển sớm, được thương mại hóa vào thập niên 1970. Mặt khác, trong ban nhạc 1.8µm bước sóng, sự mất mát của quang là thấp nhất và kể từ nguyên liệu thô abastoes sợi quang học là gần như 0-là lý tưởng cho việc gửi thông tin cao tốc độ và wideband xa hơn đến những nơi. Bước sóng trong phạm vi của 1.5µm kinh nghiệm giảm cân thấp nhất. Theo đó, với thành công, phát triển và thương mại hóa một yếu tố ảnh cho phạm vi này, một hệ thống với khoảng cách tái tạo dài hơn 100km sẽ được sử dụng. Trong các ứng dụng thực tế, ngay cả khi sợi quang học kinh nghiệm thấp mất 0.2dB / km, thấp mất đặc điểm không được sử dụng hoàn toàn vì sự gia tăng trong phân phối mất và vật liệu kết nối. Việc truyền tải tốc độ của hệ thống kỹ thuật số và băng thông truyền tải của hệ thống tương tự đang bị giới hạn bởi các loại sợi quang học và ánh sáng phát ra các yếu tố được sử dụng.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
Configuration elements as well as proper selection of wavelength to be utilized should be considered carefully when designing the optical transmission system.
The range of wavelength currently used widely is about 1.25µm-1.3µm. The wavelength having a range of 1.5µm-1.6µm is currently under development. In the band of 0.8µm wavelength, loss of optical fiber is greater than that of long wavelength range. GaAlAs(light source) and Si (light receiving element) being developed early, was commercialized in 1970s. On the other hand, in the band of 1.8µm wavelength, the loss of optical fiber is the lowest and since the material distribution of abastoes optical fiber is almost 0-is ideal for sending high speed and wideband information to farther places. The wavelength in the range of 1.5µm experiences the lowest loss. Accordingly, with successfully developing and commercializing a photo element for this range, a system with a regeneration distance of longer than 100km will be used. In actual applications, even if the optical fiber experiences low loss of 0.2dB/km, low loss characteristics is not utilized fully because of the increase in connection loss and material distribution.
The transmission speed of digital system and the transmission bandwidth of analog system are restricted by the type of optical fibers and light emitting elements used.
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: