The liquid chromatographic method used for the determination of pigmen dịch - The liquid chromatographic method used for the determination of pigmen Việt làm thế nào để nói

The liquid chromatographic method u

The liquid chromatographic method used for the determination of pigments consisted of a gradient elution procedure with UV–visible detection. Measurements of pigments were made on a Shimadzu modular liquid chromatographic system, equipped with a LC-10 AD pump, a SPD-M6A UV–visible diode array detector equipped with a flow cell (length of light path 10 mm, inner volume 8 ll) and controlled with a Class LC-10 data acquisition software (also from Shimadzu). The injection valve was a Rheodyne (Cotati, CA) Model 7725i with an injection loop of 20 ll. The HPLC system was equipped with a reversed phase C18 Spherisorb ODS-2 (Alltech, Deerfield, IL) column (5 lm, 25 cm · 4.6 mm I.D.). A precolumn (5 lm, 7.5 · 4.6 mm I.D.) of the same material was fitted to protect the main column. Separation and quantification of the cochineal pigments were carried out using a method previously developed by the authors (Gonzalez et al., 2002). The mobile phase consisted of water (A), methanol (B) and 5% orthophosphoric acid in water (C). The elution program, which lasted 30 min, consisted of an initial mixture of 50%A:40%B:10%C held for 11 min. Then the mixture was changed over the next 13 min to
90%B:10%C, and maintained for 6 additional min. The flow rate of the mobile phase was 1.2 ml min1.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
The liquid chromatographic method used for the determination of pigments consisted of a gradient elution procedure with UV–visible detection. Measurements of pigments were made on a Shimadzu modular liquid chromatographic system, equipped with a LC-10 AD pump, a SPD-M6A UV–visible diode array detector equipped with a flow cell (length of light path 10 mm, inner volume 8 ll) and controlled with a Class LC-10 data acquisition software (also from Shimadzu). The injection valve was a Rheodyne (Cotati, CA) Model 7725i with an injection loop of 20 ll. The HPLC system was equipped with a reversed phase C18 Spherisorb ODS-2 (Alltech, Deerfield, IL) column (5 lm, 25 cm · 4.6 mm I.D.). A precolumn (5 lm, 7.5 · 4.6 mm I.D.) of the same material was fitted to protect the main column. Separation and quantification of the cochineal pigments were carried out using a method previously developed by the authors (Gonzalez et al., 2002). The mobile phase consisted of water (A), methanol (B) and 5% orthophosphoric acid in water (C). The elution program, which lasted 30 min, consisted of an initial mixture of 50%A:40%B:10%C held for 11 min. Then the mixture was changed over the next 13 min to90%B:10%C, and maintained for 6 additional min. The flow rate of the mobile phase was 1.2 ml min1.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
Phương pháp sắc ký lỏng được sử dụng để xác định các chất màu gồm một thủ tục rửa giải gradient với UV phát hiện có thể nhìn thấy. Đo của các sắc tố đã được thực hiện trên một mô-đun hệ thống sắc ký lỏng Shimadzu, được trang bị với một máy bơm AD LC-10, một mảng diode phát hiện SPD-M6A UV-nhìn thấy được trang bị với một tế bào dòng chảy (độ dài của ánh sáng đường 10 mm, khối lượng bên trong 8 ll) và kiểm soát với một LC-10 phần mềm thu thập dữ liệu Class (cũng từ Shimadzu). Van tiêm là một Rheodyne (Cotati, CA) Model 7725i với một vòng lặp tiêm 20 ll. Hệ thống HPLC được trang bị với một giai đoạn đảo ngược C18 Spherisorb ODS-2 (Alltech, Deerfield, IL) cột (5 lm, 25 cm · 4,6 mm ID). Một precolumn (5 lm, 7.5 · 4,6 mm ID) của cùng một tài liệu đã được trang bị để bảo vệ cột chính. Tách và xác định số lượng các sắc tố màu cánh kiến được thực hiện bằng cách sử dụng một phương pháp trước đây được phát triển bởi các tác giả (Gonz? Alez et al., 2002). Pha động gồm nước (A), methanol (B) và 5% axit orthophosphoric trong nước (C). Các chương trình rửa giải, kéo dài 30 phút, bao gồm một hỗn hợp ban đầu là 50% A: 40% B: 10% C đã tổ chức cho 11 phút. Sau đó, hỗn hợp được thay đổi trong vòng từ 13 phút đến
90% B: 10% C, và duy trì cho thêm 6 min. Tốc độ dòng chảy của pha động là 1,2 ml min? 1.
đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: