Near-line and offline storage (often called Hierarchical Storage Manag dịch - Near-line and offline storage (often called Hierarchical Storage Manag Việt làm thế nào để nói

Near-line and offline storage (ofte

Near-line and offline storage (often called Hierarchical Storage Management) is the modern way of dealing with current storage needs. Hard disks are becoming cheaper, but data storage requirements are higher, so it's better to plan for HSM than assume disks can continually be added to systems.

HSM is essentially the automatic movement of data between media, the media type used depending on when it was last accessed. Many software and hardware vendors have HSM solutions, and all are based on the same basic techniques.

The most common HSM setup is where there's s online storage (the hard disk), near-line storage (some sort of fast media from where a file can be quickly retrieved), and offline storage (slower media that might take some time for files to be recovered, but it is cheaper for a long-term storage). This arrangement is the major thrust of today's systems. Most of the time these systems will comprise optical media for near-line and tape media for offline storage.

Data is automatically moved from the online disk to the near-line optical media if it hasn't been accessed for a definable period of time. This is typically three months (depending on your business). This near-line system is likely to be erasable optical disks in some form of jukebox.

The system has to operate on the basis that a user won't know that a file has been moved into near-line storage. Therefore some marker is left in the directory structure on the disk so that the user can still see the file. If the user then tries to open it, the file will automatically be copied from near-line to online storage, and opened for the user. All the user notices is a slight time delay while the file is opened.

Moving data from near-line to offline storage can be done using a similar mechanism, but more often the marker left in the directory for the user to see will just contain a reference. This gives the user the facility to request the file back from the systems administrator, and could have information like 'This file has been archived to offline media' and a reference to the tape number that the file is on. This is then sent to the systems administrator and the file can be recovered from tape in the usual way.

Some modern systems have the ability to keep multiple tapes in a tape changer or jukebox system, so retrieval from offline to online storage can be automatic. However, it is more likely that when a file goes into offline storage it will never be recovered, as it has probably been untouched for several months (again depending on the business). Therefore the requirement to recover from offline to online is reasonably infrequent.

The choice of storage media type is a crucial aspect of HSM. The cheapest is undoubtedly tape (be it digital, analogue or digital linear), so this tends to be used for offline storage. However, tape has no guarantee of data integrity beyond one or two years, whereas optical systems, such as CDs, WORMs and MO disks, have much better data integrity over a longer period of time. Depending on the precise application, archiving systems are usually based on the media type that has the best integrity. The major suppliers within the HSM market are totally open about the media that can be used with their software. Current HSM systems support most hardware devices, so you can mix and match media to suit requirements.
0/5000
Từ: -
Sang: -
Kết quả (Việt) 1: [Sao chép]
Sao chép!
Near-line and offline storage (often called Hierarchical Storage Management) is the modern way of dealing with current storage needs. Hard disks are becoming cheaper, but data storage requirements are higher, so it's better to plan for HSM than assume disks can continually be added to systems. HSM is essentially the automatic movement of data between media, the media type used depending on when it was last accessed. Many software and hardware vendors have HSM solutions, and all are based on the same basic techniques. The most common HSM setup is where there's s online storage (the hard disk), near-line storage (some sort of fast media from where a file can be quickly retrieved), and offline storage (slower media that might take some time for files to be recovered, but it is cheaper for a long-term storage). This arrangement is the major thrust of today's systems. Most of the time these systems will comprise optical media for near-line and tape media for offline storage. Data is automatically moved from the online disk to the near-line optical media if it hasn't been accessed for a definable period of time. This is typically three months (depending on your business). This near-line system is likely to be erasable optical disks in some form of jukebox. The system has to operate on the basis that a user won't know that a file has been moved into near-line storage. Therefore some marker is left in the directory structure on the disk so that the user can still see the file. If the user then tries to open it, the file will automatically be copied from near-line to online storage, and opened for the user. All the user notices is a slight time delay while the file is opened.
Moving data from near-line to offline storage can be done using a similar mechanism, but more often the marker left in the directory for the user to see will just contain a reference. This gives the user the facility to request the file back from the systems administrator, and could have information like 'This file has been archived to offline media' and a reference to the tape number that the file is on. This is then sent to the systems administrator and the file can be recovered from tape in the usual way.

Some modern systems have the ability to keep multiple tapes in a tape changer or jukebox system, so retrieval from offline to online storage can be automatic. However, it is more likely that when a file goes into offline storage it will never be recovered, as it has probably been untouched for several months (again depending on the business). Therefore the requirement to recover from offline to online is reasonably infrequent.

The choice of storage media type is a crucial aspect of HSM. The cheapest is undoubtedly tape (be it digital, analogue or digital linear), so this tends to be used for offline storage. However, tape has no guarantee of data integrity beyond one or two years, whereas optical systems, such as CDs, WORMs and MO disks, have much better data integrity over a longer period of time. Depending on the precise application, archiving systems are usually based on the media type that has the best integrity. The major suppliers within the HSM market are totally open about the media that can be used with their software. Current HSM systems support most hardware devices, so you can mix and match media to suit requirements.
đang được dịch, vui lòng đợi..
Kết quả (Việt) 2:[Sao chép]
Sao chép!
Gần dòng và lưu trữ offline (thường được gọi là phân cấp quản lý lưu trữ) là cách hiện đại đối phó với nhu cầu lưu trữ hiện hành. Đĩa cứng đang trở nên rẻ hơn, nhưng yêu cầu lưu trữ dữ liệu cao hơn, do đó, nó tốt hơn để lập kế hoạch cho HSM hơn giả đĩa liên tục có thể được thêm vào hệ thống. HSM về cơ bản là sự chuyển động tự động dữ liệu giữa các phương tiện truyền thông, các loại phương tiện truyền thông được sử dụng tùy thuộc vào khi nó được truy cập lần cuối. Nhiều phần mềm và phần cứng các nhà cung cấp có các giải pháp HSM, và tất cả đều dựa trên các kỹ thuật cơ bản giống nhau. Các thiết lập HSM phổ biến nhất là nơi có s lưu trữ trực tuyến (đĩa cứng), lưu trữ gần dòng (một số loại phương tiện truyền thông nhanh chóng từ nơi một tập tin có thể nhanh chóng lấy ra), và lưu trữ offline (phương tiện truyền thông chậm hơn mà có thể mất một thời gian cho các tập tin được phục hồi, nhưng nó là rẻ cho một lưu trữ dài hạn). Sự sắp xếp này là lực đẩy chính của hệ thống hiện nay. Hầu hết thời gian các hệ thống này sẽ bao gồm các phương tiện truyền thông quang học cho gần dòng và phương tiện truyền thông băng lưu trữ ngoại tuyến. Dữ liệu được tự động chuyển từ đĩa trực tuyến để các phương tiện truyền thông quang học gần dòng nếu nó không được truy cập trong một thời gian xác định được của thời gian. Đây thường là ba tháng (tùy thuộc vào doanh nghiệp của bạn). Hệ thống gần dòng này có thể là các ổ đĩa quang xóa được trong một số hình thức của máy hát tự động. Hệ thống có hoạt động trên cơ sở đó người dùng sẽ không biết rằng một tập tin đã được chuyển vào lưu trữ gần dòng. Vì vậy một số dấu hiệu còn lại trong cấu trúc thư mục trên đĩa để người dùng vẫn có thể xem các tập tin. Nếu người dùng sau đó cố gắng để mở nó, các tập tin sẽ tự động được sao chép từ gần dòng để lưu trữ trực tuyến, và mở cửa cho người sử dụng. Tất cả các thông báo người dùng được một thời gian chậm trễ trong khi các tập tin được mở. Di chuyển dữ liệu từ gần dòng để diễn đàn lưu trữ có thể được thực hiện bằng cách sử dụng cơ chế tương tự, nhưng thường xuyên hơn các điểm đánh dấu còn lại trong thư mục cho người dùng xem sẽ chỉ chứa một tài liệu tham khảo. Điều này cho phép người sử dụng các thiết bị để yêu cầu các tập tin trở lại từ người quản trị hệ thống, và có thể có các thông tin như 'Tập tin này đã được lưu trữ phương tiện truyền thông ẩn' và một tham chiếu đến số băng mà tập tin có trên. Điều này sau đó được gửi đến người quản trị hệ thống và các tập tin có thể được phục hồi từ băng theo cách thông thường. Một số hệ thống hiện đại có khả năng giữ nhiều băng trong một hệ thống đổi băng hoặc máy hát tự động, vì vậy hồi từ ẩn để lưu trữ trực tuyến có thể được tự động. Tuy nhiên, nó có nhiều khả năng rằng khi một tập tin đi vào lưu trữ offline nó sẽ không bao giờ được phục hồi, vì nó có thể đã trở hoang sơ trong vài tháng (một lần nữa tùy thuộc vào kinh doanh). Do đó yêu cầu để phục hồi từ ẩn để trực tuyến là hợp lý không thường xuyên. Sự lựa chọn của các loại phương tiện lưu trữ là một khía cạnh quan trọng của HSM. Rẻ nhất chắc chắn là băng (có thể là kỹ thuật số, tương tự hoặc kỹ thuật số tuyến tính), vì vậy điều này có xu hướng được sử dụng để lưu trữ offline. Tuy nhiên, băng có gì đảm bảo toàn vẹn dữ liệu vượt quá một hoặc hai năm, trong khi hệ thống quang học, như CD, Worms, đĩa MO, có tính toàn vẹn dữ liệu tốt hơn nhiều trong một thời gian dài. Tùy thuộc vào các ứng dụng chính xác, hệ thống lưu trữ thường được dựa trên các loại phương tiện truyền thông có tính toàn vẹn nhất. Các nhà cung cấp lớn trong thị trường HSM là hoàn toàn cởi mở về các phương tiện truyền thông có thể được sử dụng với các phần mềm của họ. Hệ thống HSM hiện tại hỗ trợ hầu hết các thiết bị phần cứng, vì vậy bạn có thể trộn và phương tiện truyền thông phù hợp cho phù hợp với yêu cầu.













đang được dịch, vui lòng đợi..
 
Các ngôn ngữ khác
Hỗ trợ công cụ dịch thuật: Albania, Amharic, Anh, Armenia, Azerbaijan, Ba Lan, Ba Tư, Bantu, Basque, Belarus, Bengal, Bosnia, Bulgaria, Bồ Đào Nha, Catalan, Cebuano, Chichewa, Corsi, Creole (Haiti), Croatia, Do Thái, Estonia, Filipino, Frisia, Gael Scotland, Galicia, George, Gujarat, Hausa, Hawaii, Hindi, Hmong, Hungary, Hy Lạp, Hà Lan, Hà Lan (Nam Phi), Hàn, Iceland, Igbo, Ireland, Java, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Kurd, Kyrgyz, Latinh, Latvia, Litva, Luxembourg, Lào, Macedonia, Malagasy, Malayalam, Malta, Maori, Marathi, Myanmar, Mã Lai, Mông Cổ, Na Uy, Nepal, Nga, Nhật, Odia (Oriya), Pashto, Pháp, Phát hiện ngôn ngữ, Phần Lan, Punjab, Quốc tế ngữ, Rumani, Samoa, Serbia, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenia, Somali, Sunda, Swahili, Séc, Tajik, Tamil, Tatar, Telugu, Thái, Thổ Nhĩ Kỳ, Thụy Điển, Tiếng Indonesia, Tiếng Ý, Trung, Trung (Phồn thể), Turkmen, Tây Ban Nha, Ukraina, Urdu, Uyghur, Uzbek, Việt, Xứ Wales, Yiddish, Yoruba, Zulu, Đan Mạch, Đức, Ả Rập, dịch ngôn ngữ.

Copyright ©2025 I Love Translation. All reserved.

E-mail: